BMW Carbon Fibre Shark Fin Aerial Cover by FORM

An easy, subtle modification that ties in with existing carbon fibre accessories. The FORM shark fin aerial cover slides over the OEM antenna and fixes with pre-applied 3M tape. Made from a single layer of pre-preg carbon fibre in a 2x2 weave, it matches OEM and most aftermarket carbon, and radio interference is non-existent.

Key Features

• Manufactured entirely from pre-preg carbon fibre in a 2x2 weave to match OEM carbon
• Slides directly over the OEM shark fin aerial — no removal or modification required
• Pre-applied 3M double-sided tape with adhesive promoter supplied
• Single-layer construction keeps radio interference non-existent
• One honest note: carbon fibre can, in some cases, interfere with GPS signals once installed

Compatible Models

Two versions are available. If your model is out of stock, match your version (A or B) and choose from any of the remaining vehicles listed — or contact us and we'll be happy to advise.

Version A (TX-01)

• BMW 2 Series, M2 & M2 Competition (2014-2021, F22 F87)
• BMW 2 Series & M240i Coupe (2021-2022, G42)
• BMW 2 Series Gran Coupe (2020+, F44)
• BMW 3 Series & M3 (2012-2019, F30 F80)
• BMW 3 Series & M3 (2019-2024, G20 G80)
• BMW 4 Series & M4 (2014-2020, F32 F82)
• BMW 4 Series & M4 (2021-2024, G22 G23 G26 G82)
• BMW 5 Series & M5 (2017-2023, G30 F90)
• BMW 7 Series Saloon (2016+, G12)
• BMW 8 Series & M8 (2018+, G14 G15 G16 F91 F92 F93)

Version B (TX-02)

• BMW 1 Series (2011-2019, F20 F21)
• BMW 1 Series (2019-2024, F40)
• BMW 3 Series Estate (2012-2019, F31)
• BMW 3 Series Estate (2019+, G21)
• BMW 5 Series Estate (2017+, G31)
• BMW X3 & X3M (2018+, G01 F97)
• BMW X4 (2014-2018, F26)
• BMW X4 & X4M (2018+, G02 F98)
• BMW X5 & X5M (2013-2018, F15 F85)
• BMW X5 & X5M (2019+, G05 F95)
• BMW X6 & X6M (2013-2019, F16 F86)
• BMW X6 & X6M (2020+, G06 F96)
• BMW X7 (2018+, G07)

Specification

• Dimensions: 23cm x 8cm x 7cm
• Weight: 0.1kg
• Material: carbon fibre
• Manufacturer: FORM
• Warranty: 1 year

What's in the Box

• 1 x full carbon fibre shark fin cover
• Pre-applied 3M double-sided tape
• 1 x adhesive promoter

How to Install

You'll need mild soap and water, a microfibre cloth, isopropyl alcohol or panel wipe, and optionally a hair dryer for warming the tape.

1. Clean the antenna — wash the shark fin with soap and water, then dry it completely.
2. Degrease the surface — wipe with alcohol or a panel wipe to remove wax and oil, then let it dry.
3. Test fit — place the cover over the antenna without removing the tape liner and check it lines up.
4. Stick it on — peel the 3M tape liner, place the cover, and press firmly around all edges for 30-60 seconds. Warming the tape slightly gives a stronger bond.
5. Let it cure — avoid touching or washing the car for 24-48 hours.