Toyota GR Supra A90 Mk5 Carbon Fibre Front Bumper Canards for ADRO Front Bumper

ADRO Front Bumper Canards for Toyota GR Supra A90 Mk5 (2020–2026)

Canards are one of those upgrades that look subtle in isolation and transformative once fitted to the car. ADRO's Front Bumper Canards for the Toyota GR Supra A90 Mk5 are designed to add layered, motorsport-derived definition to the front corners of the vehicle, integrating cleanly into the existing geometry of the ADRO Facelift Front Bumper rather than sitting on top of it like a generic aftermarket addition.

Designed specifically to fit between the bumper vent and the outer edge of the ADRO Facelift Front Bumper, the leading edge follows the bumper crease while the trailing edge wraps neatly into the wheel arch. The result is a sharper, more aggressive front-end profile that feels like an extension of the bumper design itself.

Constructed from pre-preg carbon fibre with a tight 2x2 twill weave and finished in deep high-gloss lacquer, these canards are supplied as a complete matched set with two left-hand and two right-hand pieces. The weave is mirrored symmetrically across both sides and the gloss finish is consistent with ADRO's V2 Front Lip and wider GR Supra aero range, creating a cohesive front-end package.

Key Features

• ADRO Front Bumper Canards for Toyota GR Supra A90 Mk5
• Sold as a complete matched set - 2 left-hand and 2 right-hand pieces, 4 pieces total
• Pre-preg carbon fibre construction with 2x2 twill weave
• Deep high-gloss lacquer finish
• Flush-fit design between bumper vent and outer edge
• Designed to read as part of the original bumper geometry
• Compatible with ADRO Facelift Front Bumper A18A20-2101 only
• Designed to pair with ADRO Front Lip V2 A18A20-1203 for the most cohesive finish
• Tape-on and bolt-on installation both supported
• 3M automotive adhesive tape included

What's in the box?

• 1 x Set of ADRO Pre-Preg Carbon Fibre Canards - 2 LH + 2 RH
• 3M Adhesive Tape

Fitment / Compatibility

Model	Years	Chassis	Body Style	Notes
Toyota GR Supra 2.0	2020–2026	A90/J29	Coupe	ADRO Facelift Bumper A18A20-2101 required
Toyota GR Supra 3.0	2020–2026	A90/J29	Coupe	ADRO Facelift Bumper A18A20-2101 required
Toyota GR Supra A91 editions	2021–2026	A90/J29	Coupe	ADRO Facelift Bumper A18A20-2101 required

Important: These canards are not compatible with the factory OEM Toyota GR Supra front bumper. The ADRO Facelift Front Bumper A18A20-2101 is mandatory for fitment.

Not sure if this fits your car? Call our team on the number at the top of the page or email [email protected] with your vehicle details.

FAQs

Q: Will these canards fit the factory OEM GR Supra front bumper?

A: No. These canards are designed exclusively for the ADRO Facelift Front Bumper A18A20-2101. The geometry is specific to the ADRO bumper's vent position and outer edge profile, so they will not fit the factory Toyota front bumper and there is no adapter route available.

Q: Do the canards also require the ADRO V2 Front Lip to be fitted?

A: The canards are primarily designed to work alongside the ADRO Facelift Front Bumper and ADRO Front Lip V2 A18A20-1203 as part of a complete front-end package. They can be fitted to the ADRO bumper without the V2 lip, but pairing all three components gives the most cohesive finished result.

Q: How are the canards attached - tape or bolts?

A: Both options are supported. The canards can be mounted using the included 3M automotive adhesive tape for a clean, hardware-free finish, or bolted on for owners who prefer a mechanical fixing. The design accommodates both installation methods.

Q: Is the carbon weave matched between the left and right canards?

A: Yes. All four pieces are laid up from the same pre-preg carbon cloth with consistent 2x2 twill alignment. The weave is mirrored left-to-right, giving a symmetrical finish under direct light.

Q: Are these canards compatible with the GR Supra 2.0 four-cylinder as well as the 3.0?

A: Yes. Compatibility is determined by the front bumper, not the engine. All GR Supra A90/J29 variants, including 2.0 and 3.0 models, are compatible provided they are fitted with the ADRO Facelift Front Bumper.

Q: Can AUTOID fit these at their facility?

A: Yes. AUTOID offers professional fitting at our Brentwood, Essex facility. Contact [email protected] to book an appointment. We also have a network of partnered dealers globally for local installation.